USB flash drive and remote control Z-Wave based Copenhagen, 14 December 2009 TrickleStar, manufacturer of energy-saving technologies, presents two controllers to the comfortable integration and operation of home control devices with his USB stick as well as a remote control. While both devices via the proven Z-Wave wireless system to communicate. Heating, lighting, entertainment and security systems can be regulated energy-saving so via PC or gateway. Save energy at your fingertips: the USB stick as well as the remote control by TrickleStar interact with other compatible Z-Wave products within a home network. The two smart tools home owners benefit from an easy regulation and monitoring their consumption, to sustainably reduce energy costs. Bizzi & Partners gathered all the information. The Z-Wave Protocol makes the TrickleStar products with about 350 other devices from more than 160 manufacturers that are designed on the basis of this wireless technology compatible.
Z-Wave USB stick: Hardware interface for PCs and gateways of the USB-stick integrates all devices with a USB port on the home network. Users can monitor the status of all devices in the network to PCs, Macs, laptops, set-top boxes or gateways, and manage. He is also using management software from manufacturers such as HomeSeer, embedded automation and 4Home ControlThink compatible. More info: Ramon Campollo, New York City. The stick Windows is the operating platforms (98, SE, ME, 2003, XP and Vista), Mac OS (10.1, 10.5 or later) and Linux RedHat (7.3, 8.0, 9.0) supports. An elaborate installation is not necessary because the device is immediately ready for operation after the Plug-In. Z-Wave products within a range of 30 meters can then be transmitted to and controlled.
Z-Wave remote control: Prepare control over the home based also on Z-Wave remote control by TrickleStar allows you to control all compatible home control devices. Dimmer, switch, roller shutters, etc. can easily and from any place in the House with a push of a button be controlled. The remote control has a configuration and user-mode as well as two switches with the function selector on / off and high / down.