Thanks to the rigid structure of the aluminum doors may be installed in places of high permeability, which require high quality and functionality of persisting under heavy loads and intensive operation. To the relative disadvantages include aluminum doors unless a sufficiently high the cost, compared with other designs front door the same price range they have a lot of advantages. First, the possibility of manufacturing doors of all shapes and designs with different ways of opening. Secondly, high manufacturability. Thirdly, maintainability and high performance.

Fourth, contemporary design and gorgeous looks. Apart from the traditional rectangular shape made of aluminum profile, you can create designs of other forms, for example, round. Open these doors will be just as pvc doors, meaning they can be hinged (swing and tilt), sliding, lifting and sliding, parallel-sliding, folding and automatic. Swing can be either traditional, ie, opened as the outside, and inwards, and with optional tilting, similar windows for ventilation. Double doors can be both with its own track, and with the dependent (middle porch) – right and left.

Sliding Design is always combined with a hollow glass. You can still use the one-, two-, trehkoleynoe direction. In this case, two thirds of the doors open and pushes each other. Such mechanisms of sliding doors can be used in doors and in windows, but more on that below. Standard models of aluminum doors do not exist. All designs are made by special order. Aluminium windows and doors are easily combined and can easily combined, blend in the design of the house. Filling the doorways may be made of glass, insulated glass, using a blind panel, filled tverdopenistym filler (insulation material) or different profiles. Sills are made of special profiles. Paint the doors can be any color (on request) – gloss, satin, or anodized metal. System of aluminum profiles allows make a choice of two different colors for interior and exterior sides of aluminum structures, so that the doors fit perfectly with the color and interior along with exterior finishing of the building. In this case, all door accessories (Hinges, latches, handles) can be performed in the same color as the door. When you select a profile, you can make a mistake and get a profile for windows, not doors. Door profile is wider than the window, and if there are no specialists, it is better refer to directories. Paint on the surface of the profile shall be applied without any errors (roughness, blotches or streaks), and not flaky. Anodized profile must also have a uniform surface. Particular attention should be paid to build quality. Angles of the box and shutters should be connected without any gaps or protrusions. Mortgages angle brackets are more reliable when mounted on the molded pins, rather than screws. Corner joints in the warm door must always be missed sealant. Fillet should be indoors, regardless of where the door opens: outward or inward. The gap between the profiles of glazing beads are not exceed 0,25 mm, ie it should not be seen. Installed on the box rubber seals should not be interrupted or be glued into the corners. Fit condition to anyone filling should be smooth without waves. The corners are not should be no gaps. Parts of locks and door handles should not hang